Tire block cutting machine is prepared for the crush of host machine, Not only it makes the cutting strip-type waste rubber cut into about 3*5*8 cm small blocks, but also can enter into host machine again through mutual use between sword and fixed knife,convenient to feed, high output and won’t damage roller easily, power is 5.5 kw, revolting speech is 380 r/min,shape dimension:1 m*0.8 m*1.4 m. To pay attention to the space between sword knife and fixed knife when the machine is in operation, best to keep at around 0.1 mm, so that the steel wire can be cut off.
Raw Materials and Application
Waste tire block cutters are designed to cut waste tires into uniformly sized rubber blocks for further processing. They are widely used in tire recycling plants as pre-treatment equipment before crushing, shredding, or grinding. By cutting large tire blocks into manageable sizes, the machine improves processing efficiency, reduces equipment wear, and enhances overall recycling performance.
Working Video of Scrap tire blocks cutter
Structure and Features of Scrap tire blocks cutter
- The device consists of frame, motor, transmission mechanism, balance equipment, two move knives and a fixed knife, and the compression gear .
- Knife is made from alloy, hard wear resistant, can be used after repeatedly grinding.
- Uniform speed of the device, shear force, low energy consumption, easy operation and safety.
Parameters of Scrap tire blocks cutter
| Type | Common Tire Block Cutter | Updated Tire Block Cutter |
| Item | Technical parameter | Technical parameter |
| Motor power | 5.5 KW | 18.5 KW |
| Rubber block size | 3*5*8cm | 5*5cm |
| Capacity | 800kg/h | 1500kg/h |
| L*W*H | 1.0*0.8*1.4m | 1.3*1.1*1.5m |
| Weight | 800kg | 1200kg |
